SN0054621-00 E A-1A Port- and HBA-levelParametersThe tables in this appendix list the following types of SANsurfer iSCSI HBA CLIparameters: Port-level Parameters HBA-level Parameters (see page A-10)Port-level ParametersTable A-1 lists the HBA port firmware parameters and their values. To view allparameters, both configurable and non-configurable (read-only), use the -coption in non-interactive mode. To edit configurable parameters, use the -n optionin non-interactive mode.NOTE:The parameters in this table are sorted alphabetically for ease of use.Table A-1. Port SettingsParameter Value Alias DescriptionAFW_AutoConnect on, off AFWC When on, the HBA will not try to autoconnect tothe configured targets at boot time. Instead, thehost must issue Set Device Database Entrycommands (0063h) to establish connections totargets.AFW_Delayed_Ack on, off AFDACK Determines what occurs when the HBA receivesa Data-In PDU with the Final bit set and no sta-tus reported. When on, the HBA sends a TCPacknowledgment immediately (this is the defaultvalue). When this parameter is off, the HBAdelays the acknowledgment and waits for moredata.AFW_Device_Timeout on, off AFWDT When on, the HBA firmware ignores the IOCBcommand timeout values specified by the host.
