TB8100 Service Kit User’s Manual Configuring Miscellaneous Items 93In the Power configuration area (Configure > Base Station > Miscellaneous),the Aux power control box specifies what controls the auxiliary output. Selectone of the following options.CTCSS characteristicsThe CTCSS characteristics area (Configure > Base Station > Miscellaneous)lets you globally configure CTCSS subaudible signalling to emulate the T800or to follow the TIA/EIA603 standard.Reverting to Run modeYou can configure the base station to automatically revert to Run mode. Thisis recommended if Service Kits will remotely connect to the base station overunreliable communication lines.Option DescriptionTask Manager The auxiliary output is only turned on by Task Manager action.You need to define suitable tasks for your system andapplication so that the auxiliary power output is turned onwhen it is needed. To help you with this, two Task Managertasks have been created and disabled.To have the auxiliary power on all the time, simply enable thetask 'IF Base Station in Run mode THEN Enable AuxiliarySupply.'If you only want the auxiliary power on in specialcircumstances, enable the task 'IF Base Station in Run modeTHEN Disable Auxiliary Supply' and create additional tasks thatdefine when the auxiliary power is turned on and off.Mains This is the setting in the default configuration file. Output isprovided only when the PMU uses AC mains power. Thisoption is suitable for trickle charging the batteries used for thePMU’s DC power input. If the base station has a DC only PMU,this setting never turns the auxiliary power on.Option Detection time DetectbandwidthRejectbandwidthT800 < 150 ms 2 Hz 3 HzEIA603 120 – 250 ms(for 250 – 67 Hz)1.8% 3%
