TB8100 Service Kit User’s Manual Module Details 69Band The RF frequency range that the PA is type-approved to operate in.Power Specifies the RF power output rating of the PA. There are 5 W, 50 W, and100 W variants.Isolator Indicates whether the PA is fitted with an optional isolator.Alarm status Indicates whether the PA currently has any alarm conditions. If the LED isgreen, there are no active alarms. If the LED is red, the text box displays ‘Alarmsactive,’ and there is at least one active alarm. To see which alarm is active, selectMonitor > Alarms > Current Status.Serial number A unique identifier assigned to the PA in the factory.VersionsThe Versions area (Monitor > Module Details > Power Amplifier) displaysversion numbers for aspects of the PA.Hardware The version number of the PA hardware.Firmware The version number of the PA firmware and the date when the PA was updatedto its current firmware.Calibrated The date when the PA was last calibrated using the Calibration Kit.Viewing Power Management Unit InformationThe Power Management Unit form (Monitor > Module Details > PowerManagement Unit) lets you view information about the PMU of the basestation you are logged onto. Use it if you need to confirm exactly what it is thatyou are dealing with.Module The name of the PMU. This non-editable name is used internally to identifythe module on the rack frame bus.
