TB8100 Service Kit User’s Manual Working with Signalling Profiles 135Tail pip toneTail pip tones can be used to signal users that the channel is now available.They are transmitted during the hang time (while subaudible signalling isstill being transmitted). This means that only users with the same subaudiblesignalling will hear them. Make sure that there is a sufficiently long hangtime to transmit the tail pip tones for the desired duration. You can have tailpip tones as well as reminder tones.Select the Tail pip tone check box to enable the tones. Configure them asdesired.One pip every Specifies the interval between tail pip tones. The number of pips transmitteddepends on this value and on the hang time. For example, if the hang timeduration is 2000ms and there is 1 pip every 1 second, 2 pips will sound duringthe transmit tail, provided the pip duration is sufficiently short.Pip duration Specifies the length of time that the pip tone sounds for. Note that the pip toneduration cannot be longer than the hang time duration (see “Hang time” onpage 133).Tone level Specifies the amplitude of the tail pip tone relative to the nominal audio level.Tone frequency Specifies the frequency of the tail pip tone.Task ManagerIn the Add or Edit Signalling Profile dialog box, the Task Manager tab opens aTask Manager form and displays the tasks that apply to the signalling profilenamed above the tab.Use it to configure Task Manager inputs and actions that apply to the channelprofile.
