124 Part F: Configuring Channels © Tait Electronics Limited December 2007Transmit options Lets you choose what happens if the base station is transmitting when theinterval between identity broadcasts has elapsed.Tip: Use the Task Manager action Transmit CWID now to set upidentity broadcasts in ways that the Automatic CWID system areadoes not permit.Task ManagerIn the Add or Edit Channel Profile dialog box, the Task Manager tab opens aTask Manager form and displays the tasks that apply to the selected channelprofile. Use it to edit or add Task Manager inputs and actions that apply to thechannel profile.Option DescriptionImmediate The CWID burst is transmitted immediately, in spite of the factthat the base station is transmitting. Both CWID and audio aretransmitted together.Select this option for trunking control channels, which transmitcontinuously.After audio The CWID burst is delayed until after the audio has ended orthe transmitter is de-keyed. The hang time does not begin untilthe CWID burst has finished. Users with subaudible signallingenabled hear the burst.This option is suitable for trunking traffic channels, particularlyif they do not have subaudible signalling.After signalling The CWID burst is delayed further, until the hang time hasexpired and any reverse tone burst or DCS end tone has beensent. This means that the CWID burst is transmitted after anysubaudible signalling has ended. The soft-off time does notbegin until the CWID burst has finished. Users with subaudiblesignalling enabled do not hear the burst.This option is suitable for trunking traffic channels, particularlyif they have subaudible signalling.
