68 Part D: Monitoring © Tait Electronics Limited December 2007Alarm status Indicates whether the reciter currently has any alarm conditions. If the LED isgreen, there are no active reciter alarms. If the LED is red, the text box displays‘Alarms active,’ and there is at least one active alarm. To see which alarm isactive, select Monitor > Alarms > Current Status.Serial number A unique identifier assigned to the reciter in the factory.Watchdog resets The total number of times that the watchdog circuit reset the reciter becausethe reciter firmware locked up.VersionsThe Versions area (Monitor > Module Details > Reciter) displays versionnumbers for aspects of the reciter.Hardware The version number of the reciter’s hardware.Firmware The version number of the reciter firmware and its creation date.Calibrated The date when the reciter was last modified using the Calibration Kit. (Thisincludes adjusting the switching range and tuning the frequency response.)System interface The version number of the system interface board installed in the reciter.Viewing Power Amplifier InformationThe Power Amplifier form (Monitor > Module Details > Power Amplifier) letsyou view information about the PA module of the base station you are loggedon to. Use it if you need to confirm exactly what it is that you are dealing with.Module The name of the PA. This non-editable name is used internally to identify thePA.Product code The product code and name for the type of PA.
