100 Part F: Configuring Channels © Tait Electronics Limited December 2007Customizing the Default Channel ProfileThe Edit Channel Profile dialog box lets you customize the default channelprofile to suit your system. Some items display ‘See channel table.’ Youconfigure them in the channel table so that you can give different channelsdifferent values.To customize the default channel profile1. Select Configure > Base Station > General.2. In the Default profiles area, click Channel Profile. The Edit ChannelProfile form appears.Note: If the base station is part of a TaitNet MPT 1327 trunkedsystem, see TN-745-AN for instructions on how to configurechannels and profiles.3. In the General tab, define the following:a. The subaudible deviation if the base station will transmit with CTCSSor DCS.b. The talk-through repeater gain if the base station will be used as arepeater.c. If desired, a special transmitter power output level, for selection by TaskManager action.d.4. In the Receiver Gating tab, set the criteria for receiver gating (see“Configuring Receiver Gating” on page 106)5. In the Signal Path tab, do the following:
