48 Part C: Basic Tasks © Tait Electronics Limited December 2007Changing Base Station ModeSome Service Kit operations can only be carried out when the base station isnot in its normal operating mode.To change the base station’s operation mode1. Press F5 to go directly to Standby mode, or F6 for Run mode.2. Alternatively, click Mode. (Or, select Base Station > Change Mode.) If youhave rights to change mode, the Change Operating Mode dialog boxappears.3. Select the mode you want.Q Modes that you don’t have access rights to are disabled.Q To leave Download mode, reset the base station. The Service Kitdisplays the Connecting dialog box. Wait about 10 seconds for the basestation to start up, then re-connect and log on. The base station is nowin Standby mode.4. Click OK.Resetting the Base StationYou can reset the base station using the Service Kit.1. Click Mode.2. Click Reset Base Station.3. Wait for the base station to restart, and then connect and log on again.
