1 Before Using the Machine14Language Displayed on the Touch ScreenThe language of the touch screen can be changed in the following two ways:• To change the language for temporary use, press the button on thecontrol panel, and then select the required language.NOTE: The language returns to the default language after rebooting the machine.• To change the default language, enter the System Administration mode, press the button, and then select [Tools] > [System Settings] > [CommonService Settings] > [Screen/Button Settings] > [Default Language]. On the [DefaultLanguage] screen, select the required language as the default language. For moreinformation, refer to theSetups chapter on page 63.ConventionsThis section describes the conventions used throughout this System AdministrationGuide. In this guide, you will find that some terms are used interchangeably:• Paper is synonymous with media.• Document is synonymous with original.• Xerox WorkCentre 5222/5225/5230 is synonymous with the machine.OrientationOrientation is used to mean the direction of images on the page. When the image isupright, the paper (or other media) can be either long edge feed or short edge feed.Long Edge Feed (LEF)When loading documents long edge feed into the document feeder, load with one ofthe long edges facing into the document feeder, with the short edges facing the frontand back of the document feeder. When loading paper long edge feed into a paper tray,place the paper with one of the long edges toward the left-hand side and one of theshort edges toward the front of the tray.Short Edge Feed (SEF)When loading documents short edge feed into the document feeder, load with one ofthe short edges facing into the document feeder, with the long edges facing the frontand back of the document feeder. When loading paper short edge feed into a papertray, place the paper with one of the short edges toward the left-hand side and one ofthe long edges toward the front of the tray.LEF Orientation SEF OrientationPaper feed direction Paper feed direction
