Fault Codes419Screen MessagesAlong with fault codes, the following messages are displayed on the touch screen onsome occasions.124-706 The folding setting was cancelled.Check the folding setting, and try again.124-708 The output destination was changed to the center tray. Check if the specifiedsize paper is loaded in a paper tray.124-709 The document exceeded the maximum number of pages that can be stapled.Reduce the number of pages, or cancel the stapling setting, then try printingagain.133-210133-211133-212133-213133-214133-215133-216133-217133-218133-219133-220133-221133-222133-223133-224A fax error occurred. Switch off the machine, and then switch it on again.Contact the Xerox Welcome Center if the problem persists.133-226 The specified country code is not supported. Contact the Xerox WelcomeCenter.133-280133-281133-282133-283A fax error occurred. Switch off the machine, and then switch it on again.Contact the Xerox Welcome Center if the problem persists.133-700 The staple/punch settings were cancelled. Specify appropriate staple/punchpositions.133-710 The received fax data was printed using Tray 5 (Bypass), as the selected traywas not available for fax printing.134-210134-211A fax error occurred. Switch off the machine, and then switch it on again.Contact the Xerox Welcome Center if the problem persists.Code Description and RemedyMessage Description and RemedyA fault has occurred.Switch off the machine. Ensure that thescreen disappears before switching it on.If the problem persists, call for service.A fault has occurred. Switch off the machineand wait until the touch screen is completelyoff, and then restart the machine. If theproblem persists, write down the fault code(xxx-yyy) displayed on the screen. Switch offthe machine and contact the Xerox WelcomeCenter.
