System Settings75Delete All DataThis feature allows you to delete all document data on the machine. Select [Delete AllData], and then select [Start]. Then select [Yes] to execute deletion. After the deletionfinishes, you need to switch the machine off and then on.NOTE: This process may take a few hours depending on the machine configuration.Software OptionsSpecifies software options. For information on setting procedures and software codes,refer to the instructions for the required software option package. Enter passwords forthe software options using the keyboard screen and select [Reboot].Finisher AdjustmentThis feature allows you to configure the punch and booklet functions of the OfficeFinisher LX.• Hole Punch ToolDisplays the available hole punch tools. Select the hole punch tool installed on theFinisher.• Adjust Punch Position/Booklet Fold Position– Punch Position, B4 or smaller - Allows you to adjust the punch position for papersmaller than the B4 size.– Punch Position, B4 or larger - Allows you to adjust the punch position for B4 orlarger paper.The following explains how to adjust the punch position.1. Select [Punch Position, B4 or smaller] or [Punch Position, B4 or larger], and thenselect [Change Settings].2. On the screen displayed, select [Sample Printout], and then select the tray tooutput a sample printout for. Press the button.3. Enter the value of the current punch position into [Value A Before Adjustment].4. Enter the desired punch position into [Desired Value A].5. Select [Adjust] to apply the setting.6. Select [Sample Printout] and then select the tray again, to output a sampleprintout. Check with the sample printout that the punch position has beenadjusted.– Booklet Fold Position, B4 or smaller - Allows you to adjust the fold and staplepositions for paper smaller than the B4 size.– Booklet Fold Position, B4 or larger - Allows you to adjust the fold and staplepositions for B4 or larger paper.The following explains how to adjust the fold and staple positions.1. Select [Booklet Fold Position, B4 or smaller] or [Booklet Fold Position, B4 orlarger], and then select [Change Settings].2. Select [Sample Printout], and then select the tray to output a sample printout for.Press the button.3. Select the option that best describes the current fold and staple positions.4. Enter the desired fold and staple positions into [A] and [B].
