System Settings85Copy DefaultsThis feature allows you to set the default for each copy feature. The copy settings arereturned to the defaults set here when the power is switched on, when the EnergySaver mode is cancelled, or when the button is pressed. If you set defaultsfor the features you frequently use, you can quickly copy documents without changingthe settings each time.1. Select [Copy Defaults] in the[Features] menu.2. Change the required settings.Use the side tabs to switchbetween screens.3. Select [Close].Paper SupplySpecifies the default for the [Paper Supply] feature on the [Copy] screen.NOTE: If the default for [Reduce/Enlarge] is set to [Auto %], [Auto Paper Select]cannot be selected for [Paper Supply].Reduce/EnlargeSpecifies the default for the [Reduce/Enlarge] feature on the [Copy] screen.NOTE: If the default for [Paper Supply] is set to [Auto Paper Select], [Auto %] cannotbe selected for [Reduce/Enlarge].The preset options of the Reduce/Enlarge feature can be changed. For moreinformation, refer toReduce/Enlarge Presets on page 90.Original TypeSpecifies the default for the [Original Type] feature on the [Image Quality] screen.Lighten/DarkenSpecifies the default for the [Lighten/Darken] feature on the [Image Quality] screen.SharpnessSpecifies the default for the [Sharpness] feature on the [Image Quality] screen.Background SuppressionSpecifies the default for the [Background Suppression] feature on the [Image Quality]screen.2 Sided CopyingSpecifies the default for the [2 Sided Copying] feature on the [Copy] screen.Mixed Sized OriginalsSpecifies whether to enable [Mixed Sized Originals] on the [Layout Adjustment] screenby default.Edge Erase - Top & Bottom EdgesSpecifies the defaults for top and bottom margins of the [Edge Erase] feature on the[Layout Adjustment] screen. Set the margins within the range of 0-50 mm (0-2.0 inches)using the scroll buttons or the numeric keypad on the control panel.
