Xerox Standard Accounting3295. To reset all usage data to zero, click the [Reset Usage Data] button.6. Click [OK] to confirm.NOTE: Do not click the [Reset to Default] button unless you intend to delete all users,accounts and usage data from your machine.Printing a Usage ReportAt Your Computer1. Open your web browser and enter the TCP/IP address of the machine in theAddress or Location field. Press .2. Click the [Properties] tab.3. Expand the [Accounting] folder, and then the [Xerox Standard Accounting] folder.4. Click [Report and Reset].5. Click the [Generate Report] button.6. Follow any additional displayed prompts to save the XSA Report.csv (commaseparated value) file to your computer.Enabling XSA in your Print DriversRefer to the driver Help for the steps to follow to enable XSA in your print drivers.Backing Up XSA data and settings and Cloning to another deviceThe Cloning feature enables you to copy XSA account information to a file on yourcomputer. You can then use this file to restore the data on the same machine or toclone the data to other machines. You can only clone XSA accounts to another Xeroxdevice that supports the XSA feature.Check that the device you want to clone settings to supports XSA1. At a networked computer, open your web browser and enter the TCP/IP addressof the machine you want to clone settings to. Press .2. Click the [Properties] tab.3. See if Xerox Standard Accounting is shown in the [Accounting] folder. If it is not,you cannot clone to this machine.4. Click the [General Setup] folder in the directory tree.5. From the display of available hot links, verify that [Cloning] is among them.To make a Back-up file1. At your computer, open your web browser and enter the TCP/IP address of themachine with the settings you want to copy, in the Address bar. Press .2. Click the [Properties] tab.3. Expand the [Accounting] folder, and then the [Xerox Standard Accounting] folder.4. Select [Cloning], and then select [Clone].5. Click [Save] on the dialog box that appears.
