System Settings97• Server Response Time-OutSpecifies the time-out value for a response from the server.• Search Time-OutSpecifies the time-out value for user search on the server.Kerberos Server SettingsSpecifies the Kerberos servers. The following parameters are available for eachKerberos server. Use the scroll buttons to switch between screens.• Kerberos Server 1 to 5– Primary Server Name / IP Address - Specifies the domain name or IP address ofthe primary server.– Primary Server Port Number - Specifies the primary server port number.– Secondary Server Name / IP Address - Specifies the domain name or IP addressof the secondary server.– Secondary Server Port Number - Specifies the secondary server port number.– Domain Name - Specifies the Kerberos domain name. Enter a domain name upto 64 characters.SMB Server SettingsSpecifies the SMB server settings.• SMB Server SetupSpecifies the settings for the SMB server. Select [Domain Name] or [Domain &Server Names / Address].• SMB Server 1 to 5– Domain Name - Specifies the domain name. This setting is mandatory. Thedomain name for SMB Server 1 will be the default domain name.– Server Name / IP Address - Specifies the server name or IP address of up to 64characters. This setting is effective when [Domain & Server Names / Address] isselected in [SMB Server Setup].Security SettingsThis feature allows you to set up the security settings.NOTE: It is necessary to specify the device certificate for the machine in order tospecify the HTTP-SSL/TLS communications and S/MIME settings. For moreinformation, refer toSecurity - Encryption/Digital Signature on page 297.1. Select [Security Settings] in the[Features] menu.2. Change the required settings.3. Select [Close].SSL/TLS SettingsSpecifies the SSL/TLS settings.• Device Certificate - ServerSpecifies the server certificate to attach to the e-mail address.
