6 Setups70Paper Tray SettingsThis feature allows you to configure various settings for trays, and for paper to beloaded in the trays.1. Select [Paper Tray Settings] inthe [Features] menu.2. Change the required settings.3. Select [Close].Custom Paper Name / ColorSpecifies user-defined paper names and paper colors for Custom Paper Type 1 to 5and Custom Paper Color 1 to 5 respectively. The settings are available for plain paper,bond paper, and recycled paper. Enter a name of up to 24 alphanumeric charactersand symbols. Assigned names are displayed on the screens relating to paper supply.Paper Tray AttributesSpecifies the size and type of paper loaded in the paper trays. The paper traysavailable vary depending on your machine configuration.Select automatic detection of the paper size or specify a fixed size. Select a paper typefrom the list of preset types.NOTE: The machine also displays a screen for changing/confirming the followingsettings when a paper tray is pulled out and then closed.• Paper SizeSpecifies automatic detection of the paper size for Tray 1 to Tray 4, and Tray 6 usingthe tray guide levers. If the guide levers in a paper tray are not in the correct positionfor the size of paper loaded in the tray, a size error will occur. This setting is notavailable for Tray 5 (Bypass).NOTE: When loading trays with postcards, contact the Xerox Welcome Center tohave the tray settings changed specially for the use of postcards.– Custom SizeDisplays the [Custom Size] screen. When you load non-standard size paper in Tray1, Tray 2, Tray 3, or Tray 4, specify the paper width (X) and the paper height (Y) forthat tray.NOTE: Tray 6 does not support the [Custom Size] setting.– Auto DetectEnables the Auto Detect feature.• Paper Type / ColorSpecifies the paper type and color for each paper tray.NOTE: When the Envelope Tray is installed, place a check mark in the [EnvelopeFeeder] check box on the [Tray 1] screen. Paper size, type, and color options for theEnvelope Tray will then be selectable under [Paper Size] and [Paper Type].Paper Tray Attributes on Setup ScreenSpecifies whether to display the paper tray attributes on the [Setup] menu.
