16 Appendix430PDF Direct PrintingMachine Software UpgradeTo upgrade the software, you must first obtain the upgrade software and then install it.Prepare for the UpgradeIt is important to obtain the correct upgrade file for your machine. Determine thesoftware version you are currently running, as follows:1. Open your web browser and enter http:// and the TCP/IP address of the machinein the [Address] or [Location] field. Click [Enter].2. Click the [Properties] tab.3. Click the [General Setup] folder.4. Click [Configuration].5. Scroll down to [Software] to see your system software version. Write down theversion number. Note whether the Controller ROM is listed as Controller ROM orController + PS ROM. This will determine which file to download from Xerox.com.Parameter Item No. ValuePrint Sets 401 1-999 (Default: 1): Specify the number of print sets.2 Sided Print 402 0: Off (Default)1: LEF Binding2: SEF BindingSpecifies which edge of paper is to be bound for double-sidedprinting.Print Mode 403 0: Standard (Default)1: Fast2: High QualitySelects the print mode.Sort 404 0: Off (Default)1: OnSets whether to enable sorting.Layout 405 0: Auto Reduce/Enlarge (Default)1: Booklet2: Two-up3: Four-up4: 100% (actual size)Specifies layout options. “0” (Auto Reduce/Enlarge) prints withmagnification to fit the paper size selection. “1” (Booklet) performsduplex printing. “2” (Two-up) and “3” (Four-up) print two and fourpages on a single sheet of paper, respectively.Paper Size 406 0: Auto1: A4 or Letter (Default)Sets the paper size.Password - Enter a password up to 32 characters.
