6 Setups144Receive ControlSpecifies the receive control for externally submitted jobs.• According to Print Auditron - The receiving control depends on the setting made onthe machine. The options for [Job Login Success], [Job Login Failure], and [Jobwithout User ID] are displayed.• Save in Private Charge Print - Saves jobs with incorrect User ID in Private ChargePrint. The [Job without User ID] option is available for printing the job. When [Savein Private Charge Print] is selected, a user ID must be 24 bytes or less. If thespecified user ID on the print driver exceeds 24 bytes, the jobs will be cancelledwithout being saved.• Save in Charge Print - Saves jobs in Charge Print. No other option is available.Unwanted jobs should be discarded on a regular basis.• Job Login Success - Available only when [According to Print Auditron] is selected.Specifies how to treat the print jobs with a user ID or passcode authenticationsuccess. Select from [Print Job] and [Save in Private Charge Print].• Job Login Failure - Available only when [According to Print Auditron] is selected.Specifies how to treat the print jobs with a user ID or passcode authentication failure.Select from [Save in Charge Print] and [Delete Job].• Job without User ID - Specifies how to treat the jobs without a user ID (such as e-mail print jobs). Select from [Print Job], [Save in Charge Print] and [Delete Job].Allow User to Disable Active SettingsThis feature allows privileged users to temporarily disable the Watermark feature if ithas been enabled by the System Administrator to be applied to all jobs.If [Disable Active Settings] is selected, the setting automatically returns to [EnableActive Settings] when the login user is logged out.NOTE: If this setting is set to [Disable Active Settings] while a job is in progress, thesetting is not effective for the job.1. Select [Allow User to DisableActive Settings] in the [Group]menu.2. Select the required option.3. Select [Save].Job Status DefaultThis section describes the settings related to Job Status.1. Select [Job Status Default] in the[Group] menu.
