Printing using WindowsXerox WorkCentre 3315DN/3325DN/3325DNIUser Guide106• Source: Use this option to select the paper tray required. Use the bypass tray when printing onspecial materials like envelopes and transparencies. If the paper source is set to Auto Select, theprinter automatically selects the paper source based on the requested size.• Type: Set Type to correspond to the paper loaded in the tray selected. This will provide the bestquality printout. If printing Envelopes, ensure the Envelope tab is selected.• Advanced: The advanced paper options allow you to select a different paper source for the firstpage of your document or to add a front and/or back cover or to select transparency separators.• First Page: To have the first page printed on a different paper type from the rest of thedocument select the paper tray containing the paper required.• Cover Page: From the Cover Options drop-down list, select either No Covers, Front Cover,Back Cover or Front and Back Cover.From the Options drop-down list select whether the cover(s) are to be Blank orPreprinted,1 Sided Printed or 2 Sided Printed.From the Source drop-down list select the paper tray that contains the paper for the coversFrom the Type drop-down list select the type of paper for the covers.• Transparency Separator: If transparency is selected as the paper type, you can select a blankor printed Separator page to be added from another paper tray. From the Source drop-downlist, select the tray containing the paper for the separator. The separator page will be addedafter each transparency.Scaling OptionsThis allows you to automatically or manually scale your print job on a page.• Fit to Page: This allows you to scale your print job to any selected paper size, regardless of thedigital document size.• Percentage: Use this option to change the contents of a page to appear larger or smaller on theprinted page. Enter the scaling rate in the Percentage input box.
