System SetupXerox WorkCentre 3315DN/3325DN/3325DNIUser Guide1764. Press the up/down arrows to highlight the option required and press OK.5. Press the up/down arrows to highlight the setting required and press OK to save the selection.6. Continue customizing the Maintenance options as required, then press Stop to return to Readymode.Clear SettingsYou can selectively clear information stored in your machine’s memory.1. Press Machine Status on the control panel.2. Press the up/down arrows to highlight System Setup and press OK. If necessary, enter theAdministrator’s Password using the keypad. Refer to Accessing the Setup Options on page 154 forinstructions.3. Press the up/down arrows to highlight Clear Settings and press OK.The following Clear Settings options and settings are available:Serial Number Displays the serial number of themachine.• Serial No.Ram Disk(3315DN Model only)Allocates part of the Ram Disk to thejob storage area.• Enable• Disable *• 32 *- 64 MBOption Description SettingsAll Settings Clears all of the data stored inmemory and resets all of your settingsto the factory default.• Clear? Yes * | NoFax Setup Clears all Fax Setup settings andrestores all of the fax options to thefactory default.• Clear? Yes * | NoCopy Setup Clears all Copy Setup settings andrestores all of the Copy options to thefactory default.• Clear? Yes * | NoScan Setup Clears all Scan Setup settings andrestores all of the scan options to thefactory default.• Clear? Yes * | NoE-mail Setup Clears all E-mail Setup settings andrestores all of the e-mail options to thefactory default.• Clear? Yes * | NoSystem Setup Clears all System Setup settings andrestores all of the system options tothe factory default.• Clear? Yes * | NoNetwork Setup Resets all the network settings back tothe factory defaults.• Clear? Yes * | NoOption Description Settings
