General CareXerox WorkCentre 3315DN/3325DN/3325DNIUser Guide186Internal AreasDuring the printing process, paper, toner, and dust particles can accumulate inside the machine. Thiscan cause print quality problems, such as toner specks or smearing. Cleaning inside the machine clearsand reduces these problems.1. Turn the machine off and unplug the power cord. Waitfor the machine to cool down.2. Press the release latch on the left side of the machineand open the front door.3. Pull the print cartridge out and place it on a clean flatsurface.CAUTIONS:• To prevent damage to the print cartridge, do notexpose it to light for more than a few minutes. Coverit with a piece of paper, if necessary.• Do not touch the green surface on the underside ofthe print cartridge. Use the handle on the cartridgeto avoid touching this area.4. With a dry, lint-free cloth, wipe away any dust and spilledtoner from the print cartridge area.CAUTION: While cleaning the inside of the machine, becareful not to damage the transfer roller or any otherinside parts. Do not use solvents such as benzene orthinner to clean. Printing quality problems can occur anddamage can be caused to the machine.3123
