Fax SetupXerox WorkCentre 3315DN/3325DN/3325DNIUser Guide168Setting up DRPD ModeTo set up the DRPD mode:1. Press Machine Status on the control panel.2. Press the up/down arrows to highlight Fax Setup and press OK. If necessary, enter theAdministrator’s Password using the keypad. Refer to Accessing the Setup Options on page 154 forinstructions.3. Press the up/down arrows to highlight Receiving and press OK.4. Press the up/down arrows to highlight Receive Mode and press OK.RCV Start Code This code allows you to initiatefax reception from an extensionphone plugged into the EXTsocket on the back of themachine. If you pick up theextension phone and hear faxtones, enter the code. It is presetto *9* at the factory.• Enter code between 0 - 99 *Auto Reduction When receiving a fax containingpages longer than the paperloaded in the paper tray, themachine can reduce the size ofthe image to fit the size of thepaper loaded in the machine.Note: With this feature set toOff, the image will be dividedand printed actual size on two ormore pages.• On *• OffDiscard Size Discards a specific length fromthe end of the received fax.• 00-3020 *Junk Fax Setup Allows numbers that have beensent to the device to be selectedas junk fax numbers.• On• Off *DRPD Mode Enables a user to use a singletelephone line to answer severaldifferent telephone numbers.You can set the machine torecognize different ring patternsfor each number.• Waiting Ring2-Sided Print Prints faxes on both sides of thepaper either in a portrait orlandscape orientation.• Off *• Flip on Long Edge• Flip on Short EdgeLocal Drive Saving(3325DN/DNI only)Stores received faxes in thecommon box on the local drive.• Off *• OnOption Description Settings
