System SetupXerox WorkCentre 3315DN/3325DN/3325DNIUser Guide170System SetupSystem Setup options enable you to customize settings which are specific to the machine, such as Date& Time and Power Save.Machine Settings1. Press Machine Status on the control panel.2. Press the up/down arrows to highlight System Setup and press OK. If necessary, enter theAdministrator’s Password using the keypad. Refer to Accessing the Setup Options on page 154 forinstructions.3. Press the up/down arrows to highlight Machine Settings and press OK.The following Machine Settings options and settings are available:Note: * indicates the factory default setting.Option Description SettingsMachine ID Use this option to enter a namefor your machine.• IDMachine Fax No. Use this option to enter the faxnumber for your machine.• Fax:Date & Time When you set the time and date,they are used in delay fax anddelay print options, and printedon reports.Note: If the machine’s power iscut off, you need to reset thecorrect time and date once thepower has been restored.• 00-00-0000 [MDY]• 00:00 AMClock Mode You can set your machine todisplay the current time usingeither a 12-hour or 24-hourformat.• 12 Hours *• 24 HoursLanguage Use this option to set themessage display language.• English *• List of Available LanguagesDefault Mode Your machine is preset to Copymode. You can switch thisdefault mode between Fax modeand Copy mode.• Copy *• Scan• E-mail• FaxMetric Defaults Use to set the machine todisplay measurements inmillimeters or inches.• inches *• mm
