Using the Layout OptionsXerox WorkCentre 3315DN/3325DN/3325DNIUser Guide39Using the Layout OptionsThis option is used to copy multiple documents onto one sheet of paper, copy from book originals,create booklet output and produce documents which can be pasted together to make a poster.Note: Some options may be unavailable depending on your machine configuration.2 Up or 4 Up CopyingThis feature is used to copy two or more documents, in areduced size, onto one sheet of paper. It is ideal for creatinghandouts, storyboards or documents used for archivalpurposes.Note: Originals must be loaded in the automaticdocument feeder when using this feature.1. Press Copy on the control panel.2. Press Menu on the control panel.3. Press the up/down arrows to highlight Layout and press OK.4. Select the option required:• Normal: Copies an original onto one sheet of paper.• 2 Up: Copies two separate originals onto one sheet of paper.• 4 Up: Copies four separate originals onto one sheet of paper.Note: For landscape originals, place the top of the document at the back of the feeder. For portraitoriginals, place the top of the document to the left.5. Select OK to save your selections and press Menu to return to the top level menu.6. Load originals and press Start.ID Card CopyThe machine prints one side of the original on the upper halfof the paper and the other side on the lower half withoutreducing the size of the original. This feature is helpful forcopying a small-sized item, such as a business card.Note: This Copy feature is available only when you placeoriginals on the document glass. If the original is largerthan the printable area, some portions may not beprinted.Your machine can print 2 sided originals on one sheet of A4, Letter, Legal, Folio, Executive, B5, A5, or A6paper.1. Press Copy on the control panel.2. Press Menu on the control panel.3. Press the up/down arrows to highlight Layout and press OK.1 21 23 4
