Powering on the MachineXerox WorkCentre 3315DN/3325DN/3325DNIUser Guide11Powering on the MachineThe On/Off switch and the power cable socket are at the rear of the machine.1. Connect the AC Power Cord to the machine and apower outlet. The power cord must be plugged into agrounded power socket.2. Press the ON/OFF switch to the ON (I) position.Power SaveThis machine contains advanced energy conservationtechnology that reduces power consumption when it is not inactive use.• When the printer does not receive data for an extendedperiod of time, the Power Save mode becomes active and power consumption is automaticallylowered.• Press the Power Save button to select the Power Save mode immediately.To restore the machine to a normal state, press any button.Note: When in Power Save mode, the machine will not recognize when a USB Memory Device isinserted into the USB port. Press any button to restore the machine to a normal state and reinsertthe USB Memory Device into the port.Powering off the MachineThere are two ways to switch the machine off:• Press the ON/OFF switch to the (O) position.• Press the Power Save button and select Power Down and then OK.1212
