Copy ProcedureXerox WorkCentre 3315DN/3325DN/3325DNIUser Guide34For more information, refer to Paper and Media on page 143.3. Press the 2 Sided button on the control panel. Two-sided copies can be made automatically fromone or two-sided originals:• 1 1 Sided: Use this option for 1 sided originals when 1 sided copies are required.• 1 2 Sided: Use this option for 1 sided originals when 2 sided copies are required.• 1 2 Sided, Rotate Side 2: This option produces 2 sided copies from 1 sided originals androtates 180 degrees every second side image. Use this option to create documents which canbe read in a “head to toe” manner, for example a calendar.• 2 2 Sided: Use this option for 2 sided originals when 2 sided copies are required.• 2 1 Sided: Use this option for 2 sided originals when 1 sided copies are required.• 2 1 Sided, Rotate Side 2: This option produces 1 sided copies from 2 sided originals androtates 180 degrees every second side image. The “read” orientation for this option variesdepending on the input originals. For example, if “head to head” orientation originals arescanned, the output will be “head to toe”. If “head to toe” orientation originals are scanned,the output produced will be “head to head”.Select the 2 Sided option required using the up/down arrows and press OK.Note: Not all the 2 sided options are available on the WorkCentre 3315DN.4. Additional Copy options are available through the Menu button. For information aboutprogramming additional options, refer to Copy Options on page 36.Enter the Quantity• The maximum copy quantity is 999.• Use the keypad on the control panel to enter the number of copies required. The number enteredis displayed in the upper right-hand corner of the display.Note: To cancel an incorrect entry, press the C button and enter the correct quantity.Start the Job1. Press the Start button. Each document is scanned only once.2. If using the document glass to scan 2 sided originals, the machine displays a message when readyto scan side 2. Continue scanning until all sides have been scanned.The images are scanned and the Copy job is printed.
