Scan ProcedureXerox WorkCentre 3315DN/3325DN/3325DNIUser Guide49Scan to Network PC from Control PanelMake sure that your machine is connected to a network. Make sure the machine has been configuredusing the Xerox Scan Assistant utility and the scan driver has been installed. For instructions, refer tothe System Administrator guide.1. Press Scan on the control panel.2. Press the up/down arrows to highlight Network PC.3. Press OK. If you see the Not Available message, check the connection and/or setup.4. Press the up/down arrows to highlight the Login ID you want and press OK.5. If necessary, enter the password using the keypad and press OK.6. Press the up/down arrows to highlight the Scan Destination you want and press OK.7. Press the up/down arrows to highlight the Resolution you want and press OK.8. Press the up/down arrows to highlight the Color option you want and press OK.9. Press the up/down arrows to highlight the File Format you want and press OK.Note: You can also use the Xerox Scan Assistant to scan documents directly from your PC. Refer toScan Assistant on page 55.Scan to SMBMake sure that your machine is connected to a network. Make sure the machine has been configuredusing CentreWare Internet Services. Refer to the System Administrator guide for instructions.1. Press Scan on the control panel.2. Press the up/down arrows to highlight SMB and press OK.3. If required, press the 2 Sided button and Menu button to select the Scan settings. Refer to Selectthe Features on page 50.4. Press OK.5. If Authentication is enabled, enter your Login ID and, if required, your password.6. Press the up/down arrows until the server you want highlights and press OK.7. Press the up/down arrows to highlight the File Format you want and press OK.Scan to FTPMake sure that your machine is connected to a network. Make sure the machine has been configuredusing CentreWare Internet Services. Refer to the System Administrator guide for instructions.1. Press Scan on the control panel.2. Press the up/down arrows to highlight FTP and press OK.3. If required press the 2 Sided button and Menu button to select the Scan settings. Refer to Selectthe Features on page 50.4. Press OK.5. If Authentication is enabled, enter your Login ID and, if required, your password.6. Press the up/down arrows until the server you want highlights and press OK.7. Press the up/down arrows to highlight the File Format you want and press OK.