Print SetupXerox WorkCentre 3315DN/3325DN/3325DNIUser Guide165Print Setup1. Press Machine Status on the control panel.2. Press the up/down arrows to highlight Print Setup and press OK. If necessary, enter theAdministrator’s Password using the keypad. Refer to Accessing the Setup Options on page 154 forinstructions.The following Print Setup options and settings are available:Note: * indicates the factory default setting.3. Press the up/down arrows to highlight the option required and press OK.4. Press the up/down arrows to highlight the setting required and press OK to save the selection.5. Continue customizing the Print Defaults as required, then press Stop to return to Ready mode.Option Description SettingOrientation Selects the direction in which information is printed onthe page. Portrait is printed on the long edge verticallyand Landscape horizontally.• Portrait *• LandscapeQuantity Sets the default quantity. • Default setting1-9991 *Resolution Sets the dots per inch. The higher the resolution, thesharper the printed image.• 600 dpi-Normal• 1200 dpi-BestDarkness Lightens or darkens the print on the page. • Normal *• Light• DarkDarken Text Prints text darker than on a normal document. • Off *• Lighter• Normal• DarkerEmulation Sets the emulation type and option. • Emulation Type• Setup
