Macintosh ScanningXerox WorkCentre 3315DN/3325DN/3325DNIUser Guide58Macintosh ScanningYou can scan documents using Image Capture on Macintosh systems.Scanning with USB ConnectionMake sure that the machine is connected to your computer via the USB cable and powered on. Installthe scan driver. Follow the install instructions provided with your driver.1. Load originals face up into the automatic document feeder, or place a single original face down onthe document glass.2. Start Applications and click Image Capture.If the No Image Capture device connected message appears, disconnect the USB cable andreconnect it. If the problem continues, refer to the Image Capture help option to resolve theproblem.3. Select the device required.4. Set the scan options on this program.5. Scan and save your scanned image.For more information about using Image Capture, use the Image Capture help option.Use TWAIN-compliant software to apply more scan options. You can also scan using TWAIN-compliantsoftware, such as Adobe Photoshop. Scan processes differ according to the TWAIN-compliant softwarebeing used. Please refer to the User Guide supplied with the software for instructions.If scanning does not operate in Image Capture, update Mac OS to the latest version. Image Captureoperates correctly in Mac OS X 10.3.9 or higher, and Mac OS X 10.4.7 or higher.Scanning from a Network Connected MachineMake sure that the machine and your workstation are powered on and connected to the network.Install the scan driver. Follow the install instructions provided with your driver.1. Load originals face up into the automatic document feeder, or place a single original face down onthe document glass.2. Start Applications and click Image Capture.3. Depending on the Mac OS version, follow the steps below.• For 10.4-10.5:• Click Devices then Browse Devices from the Menu bar.• Select your machine in the Twain devices option. Make sure that the Use TWAINsoftware checkbox is checked.• Click Connect.If a warning message appears, click Change Port... to select the port, or if TWAIN UI appears,click Change Port... from the Preference tab and select a new port.• For 10.6, select your device below SHARED.4. Set the scan options on this program.
