Printing using WindowsXerox WorkCentre 3315DN/3325DN/3325DNIUser Guide965. After the installation is finished,select Finish.If your printer is connected to thecomputer, a Test Print page will beprinted. If the Test Print operation issuccessful, continue on to PrintProcedure on page 102 in thisdocument. If the print operationfailed, refer to Troubleshooting onpage 188.Networked PrinterWhen you connect your printer to a network, you must first configure the TCP/IP settings for theprinter. After you have assigned and verified the TCP/IP settings, you are ready to install the softwareon each computer on the network.1. Make sure that the printer is connected to your network and powered on. For details aboutconnecting to the network, refer to the System Administrator Guide.2. Insert the supplied CD-ROM intoyour CD-ROM drive.The CD-ROM shouldautomatically run, and aninstallation window appears.• If the installation windowdoes not appear, select theStart button and then Run.Type X:\Setup.exe,replacing “X” with the letterwhich represents your driveand select OK.• If you use Windows Vista,select Start > All programs> Accessories > Run, andtype X:\Setup.exe. If theAutoPlay window appears in Windows Vista, select Run Setup.exe in Install or run programfield, and select Continue in the User Account Control window.3. Select Install Software.
