August 20072-112 WorkCentre 5687 Family05-310, 05-330, 05-331Status Indicator RAPs05-310 Document too Short RAP05-310 The DADH detects a document that is shorter than 110mm.Initial Actions• Remove all documents from the DADH.• Make sure that the documents are longer than 110 mm (4.3 inches).ProcedureIf the documents are longer than 110mm, go to the procedures that follow:• 05-330, 05-331 DADH Feed Sensor Failure RAP.• 05-335 DADH Takeaway Sensor Failure RAP.• 05-350, 05-352 DADH CVT Sensor Failure RAP.• 05-340 DADH Registration Sensor Failure RAP.05-330, 05-331 DADH Feed Sensor Failure Entry RAP05-330 The DADH feed sensor does not detect the lead edge of the document within the cor-rect time after the feed motor runs.05-331 The DADH feed sensor does not detect the trail edge of the document within the cor-rect time.ProcedureWARNINGSwitch off the electricity to the machine, GP 14. Disconnect the power cord from thecustomer supply while performing tasks that do not need electricity. Electricity cancause death or injury. Moving parts can cause injury.Identify the speed of the machine, refer to SCP 7 Machine Features. Perform one of the stepsthat follow:• If the speed of the machine is 32-38 ppm, go to the 05-330A, 05-331A DADH Feed Sen-sor Failure RAP (32-38 ppm).• If the speed of the machine is 45-87 ppm, go to the 05-330B, 05-331B DADH Feed Sen-sor Failure RAP (45-87 ppm).
