August 20072-129WorkCentre 5687 Family 05C, 05DStatus Indicator RAPs05C Document Size Sensor Failure Entry RAPUse this RAP when the DADH is in the Auto Paper Select mode and does not detect the cor-rect size of paper.Also use this RAP when the DADH detects a document in the input tray when the documenttray is empty.Initial Actions• Make sure that strong lighting is not above the DADH.• Remove all documents from the DADH and input tray.• Make sure that the sensors and the area around the sensors are clean.ProcedureWARNINGSwitch off the electricity to the machine, GP 14. Disconnect the power cord from thecustomer supply while performing tasks that do not need electricity. Electricity cancause death or injury. Moving parts can cause injury.Identify the speed of the machine, refer to SCP 7 Machine Features. Perform one of the stepsthat follow , as appropriate:• If the speed of the machine is 32-38 ppm, go to the 05J DADH Document Size SensorFailure RAP (32-38 ppm).• If the speed of the machine is 45-87 ppm, go to the 05K DADH Document Size SensorFailure RAP (45-87ppm).05D DADH Motor Failure RAPProcedureWARNINGSwitch off the electricity to the machine, GP 14. Disconnect the power cord from thecustomer supply while performing tasks that do not need electricity. Electricity cancause death or injury. Moving parts can cause injury.Go to the correct procedure:• DADH Feed Motor Failure• DADH CVT Motor FailureNOTE: The component location is shown in Figure 1.DADH Feed Motor FailureNOTE: In duplex mode, the DADH feed motor runs in the forward and reverse direction. Theduplex mode component control code is provided to reverse the drive of the feed motor.Go to Flag 1. Check the DADH feed motor, MOT05-020.References:• GP 10 How to Check a Motor.• P/J181, DADH PWB and P/J204.• 01G +24V Distribution RAP.• 01B 0V Distribution RAP, refer to the 24V return.Install new components as necessary:• DADH feed motor, PL 5.15 Item 16.• DADH PWB, PL 5.10 Item 5.DADH CVT Motor FailureGo to Flag 2. Check the DADH CVT motor, MOT05-030.References:• GP 10 How to Check a Motor.• P/J181, DADH PWB and P/J203.• 01G +24V Distribution RAP.• 01B 0V Distribution RAP, refer to the 24V return.Install new components as necessary:• DADH CVT motor, PL 5.25 Item 9.• DADH PWB, PL 5.10 Item 5.
