August 20072-608 WorkCentre 5687 Family11-380-171Status Indicator RAPs11-380-171 HVF Punch Unit Paper Edge Detect RAP11-380-171 The punch unit failed to detect the edge of the paper.Initial ActionsWARNINGSwitch off the electricity to the machine, GP 14. Disconnect the power cord from thecustomer supply while performing tasks that do not need electricity. Electricity cancause death or injury. Moving parts can cause injury.Check that the paper path through the punch is clear, Figure 1. Check the punch module isseated at the rear or the machine.ProcedureGo to Flag 1. Check the wiring and repair as necessary, REP 1.2. Check the punch paper sen-sor, Figure 1. Refer to:• GP 11 How to Check a Sensor.• P/J501 HVF control PWB.• 11A-171 HVF Power Distribution RAP.Install new components as necessary:• Punch paper sensor, PL 11.153.• HVF control PWB, PL 11.157 Item 2.Enter dC330, code 11-000, entry feed motor 1, to check that the motor runs. The motor runs.Y NGo to Flag 2. Check the wiring and repair as necessary, REP 1.2. Check entry feed motor1, MOT11-000. Refer to:• GP 10 How to Check a Motor.• P/J102 HVF control PWB• 11A-171 HVF Power Distribution RAP.Install new components as necessary:• Entry Feed motor, MOT11-000, PL 11.150.• HVF control PWB, PL 11.157 Item 2.Perform SCP 6 Final Actions.Figure 1 Component locationEntry Feed motor 1,MOT11-000Punch Paper sensorREAR VIEW
