August 20072-662 WorkCentre 5687 Family11L-171, 11M-171Status Indicator RAPs11L-171 Tri-Folder Not Detected RAPUse this RAP when the machine fails to detect the tri-folder module.Initial ActionsWARNINGSwitch off the electricity to the machine, GP 14. Disconnect the power cord from thecustomer supply while performing tasks that do not need electricity. Electricity cancause death or injury. Moving parts can cause injury.Check for damage or obstructions that would prevent the tri-folder from operating correctly.ProcedureGo to Flag 1. Check the wiring of the tri-folder present link, and repair as necessary, REP 1.2.Check for 0V at P/J563 pin 7. Refer to:• P/J563, BM PWB• 11A-171 HVF Power Distribution RAP.Figure 1 Circuit diagram11M-171 Curl Suppressor Position RAPUse this RAP with the curl suppressor problems.ProcedureWARNINGSwitch off the electricity to the machine, GP 14. Disconnect the power cord from thecustomer supply while performing tasks that do not need electricity. Electricity cancause death or injury. Moving parts can cause injury.Enter dC330, code 11-084 curl suppressor solenoid, SOL11-084, Figure 1. The solenoidenergizes.Y NGo to Flag 1 and check the curl suppressor solenoid, SOL 11-084.Refer to:• GP 12 How to Check a Solenoid or Clutch.• P/J202, HVF control PWB.• 11A-171, HVF Power Distribution RAP.Install new components as necessary:• Curl suppressor solenoid, SOL 11-084, PL 11.145.• HVF control PWB, PL 11.157 Item 2Perform SCP 6 Final Actions.
