Yamaha YZF-R1 2007 Service Manual

FEATURES1-95. Push the “SELECT” button and thenrelease it to start the clock.Odometer, tripmeter, and stopwatch modesPush the “SELECT” button to switch the dis-play between the odometer mode “ODO” andthe tripmeter modes “TRIP A” and “TRIP B”and the stopwatch mode in the following order:TRIP A → TRIP B → ODO → Stopwatch →TRIP AIf the fuel level warning light comes on, theodometer display will automatically change tothe fuel reserve tripmeter mode “F-TRIP” andstart counting the distance traveled from thatpoint. In that case, push the “SELECT” buttonto switch the display between the various trip-meter, odometer, and stopwatch modes in thefollowing order:F-TRIP → Stopwatch → TRIP A → TRIP B →ODO → F-TRIPTo reset a tripmeter, select it by pushing the“SELECT” button, and then push the “RESET”button for at least one second. If you do notreset the fuel reserve tripmeter manually, it willreset itself automatically and the display willreturn to the prior mode after refueling andtraveling 5 km (3 mi).Stopwatch modeTo change the display to the stopwatch mode,select it by pushing the “SELECT” button. (Thestopwatch digits will start flashing.) Releasethe “SELECT” button, and then push it againfor a few seconds until the stopwatch digitsstop flashing.Standard measurement1. Push the “RESET” button to start the stop-watch.2. Push the “SELECT” button to stop the stop-watch.3. Push the “SELECT” button again to resetthe stopwatch.Split-time measurement1. Push the “RESET” button to start the stop-watch.2. Push the “RESET” button or start switch“ ” to measure split-times. (The colon “:”will start flashing.)3. Push the “RESET” button or start switch“ ” to measure split-times. (The colon “:”will start flashing.)4. Push the “SELECT” button to reset thestopwatch.NOTE:To change the display back to the prior mode,push the “SELECT” button for a few seconds.Coolant temperature displayThe coolant temperature display indicates thetemperature of the coolant.Push the “RESET” button to switch the coolanttemperature display to the air intake tempera-ture display.NOTE:When the coolant temperature display isselected, “C” is displayed for one second, andthen the coolant temperature is displayed.CAUTION:ECA4C81018Do not operate the engine if it is over-heated.1. Odometer/tripmeter/fuel reserve tripmeter1. Coolant temperature displayManuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keysemail: info@motomatrix.co.uk