CABLE ROUTING2-521. Fuel tank2. O-ring3. Fuel hose4. Fuel tank drain hose5. Fuel tank breather hose6. Air filter stay7. Clip8. Fuel tank bracket9. Fuel hose clamp10.Fuel pump assemblyA. Install the lip of O-ring facing upward.B. Install the part pointing the white paint partof the hose to the left side of the vehicle.C. Point the clip grip to the inside of the vehi-cle.D. Fuel piping connector attachment direc-tions. (fuel pump side)Always use hands to connect/disconnectthe connector without using tool.E. Insert the connector until the click sound isheard and check that the connector doesnot come off.Make sure that no foreign matter is caughtin the sealing section.(It is prohibited to wear the cotton workgloves or equivalent coverings.)F. After item “E” mentioned above is finished,check that the clamp is inserted from thedown side “a”, “b” and “c” sections are per-fectly equipped.G. This part works as a dropout stopper.H. Fuel piping connector attachment direc-tions. (engine side)Always use hands to connect/disconnectthe connector without using tool.I. After Step “H” as above is finished, checkthat the connector is completely attachedby sliding the double lock (orange part) “d”on the connector as shown in the illustra-tion and seeing if it touches firmly or not.Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keysemail: info@motomatrix.co.uk