ENGINE REMOVAL5-5Disconnecting the leads and hosesOrder Job/Parts to remove Q’ty RemarksFuel tank Refer to "FUEL TANK" on page 7-1.Air filter case Refer to "GENERAL CHASSIS" on page 4-1.Throttle body Refer to "THROTTLE BODIES" on page 7-4.Engine oilDrain.Refer to "CHANGING THE ENGINE OIL" onpage 3-12.Oil cooler Refer to "OIL COOLER" on page 6-4.Air cut-off valve Refer to "AIR INDUCTION SYSTEM" onpage 7-9.Starter motor Refer to "ELECTRIC STARTER" on page 5-39.1 Battery negative lead 12 Battery positive lead 13 Clutch cable 14 Engine ground lead 25 Stator coil assembly coupler 1 Disconnect.6 Crankshaft position sensor coupler 1 Disconnect.7 Oil level switch connector 1 Disconnect.8 Neutral switch connector 1 Disconnect.9 Speed sensor coupler 1 Disconnect.10 Cylinder identification sensor coupler 1 Disconnect.For installation, reverse the removal proce-dure.Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keysemail: info@motomatrix.co.uk