Yamaha YZF-R1 2007 Service Manual

ENGINE3-9NOTE:“dIAG” appears on the odometer, tripmeter andfuel reserve trip LCD.3. Press the “SELECT” button to select theCO adjustment mode “CO” or the diagnos-tic mode “dIAG”.4. After selecting “CO”, simultaneously pressthe “SELECT” and “RESET” buttons for 2seconds or more to execute the selection.5. Press the “SELECT” and “RESET” buttonsto select a cylinder.NOTE:The selected cylinder number appears on theodometer, tripmeter and fuel reserve trip LCD.• To decrease the selected cylinder number,press the “RESET” button.• To increase the selected cylinder number,press the “SELECT” button.6. After selecting the cylinder, simultaneouslypress the “SELECT” and “RESET” buttonsfor 2 seconds or more to execute the selec-tion.7. Change the CO adjustment volume bypressing the “SELECT” and “RESET” but-tons.NOTE:The CO adjustment volume appears on thetripmeter LCD.• To decrease the CO adjustment volume,press the “RESET” button.• To increase the CO adjustment volume,press the “SELECT” button.8. Release the switch to execute the selec-tion.9. Simultaneously press the “SELECT” and“RESET” buttons to return to the cylinderselection (step 5).10. Turn the main switch to “OFF” to cancel themode.EAS20630ADJUSTING THE THROTTLE CABLE FREEPLAYNOTE:Prior to adjusting the throttle cable free play,the carburetor synchronization should beadjusted properly.1. Check:• Throttle cable free play “a”Out of specification → Adjust.2. Adjust:• Throttle cable free play▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼Handlebar sidea. Loosen the locknut “1”.b. Turn the adjusting nut “2” in direction “a” or“b” until the specified throttle cable freeplay is obtained.Throttle cable free play3.0–5.0 mm (0.12–0.20 in)Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keysemail: info@motomatrix.co.uk