Yamaha YZF-R1 2007 Service Manual

FRONT FORK4-57a. Remove the rod puller attachment.b. Install the nut.c. Install the fork spring and spacer.NOTE:Install the spring with the smaller pitch “a” fac-ing up “A”.d. Reinstall the rod puller attachmente. Press down in the spacer with the forkspring compressor “1”f. Pull up the rod puller and install the rodholder “2” between the damper adjustingrod locknut “3” and the spacer “4”.NOTE:Use the side of the rod holder that is marked“A”.g. Remove the rod puller and the rod pullerattachment.h. Install the nut “1” and position it as speci-fied “b”.i. Set the cap bolt distance “c” to specifica-tion.j. Install the damper adjusting rod and capbolt, and then finger tighten the cap bolt.k. Hold the cap bolt and tighten the damperadjusting rod locknut to specification.l. Remove the rod holder and fork springcompressor.Rod puller90890-01437Universal damping rod bleedingtool setYM-A8703Rod puller attachment (M12)90890-01435Universal damping rod bleedingtool setYM-A8703Fork spring compressor90890-01441YM-01441Rod holder90890-01434Damper rod holder doubleendedYM-01434Distance “b”11 mm (0.43 in)Distance “c”13 mm (0.51 in)Damper adjusting rod locknut29 Nm (2.9 m·kg, 21 ft·lb)Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keysemail: info@motomatrix.co.uk