Yamaha YZF-R1 2007 Service Manual

OIL COOLER6-5EAS26420CHECKING THE OIL COOLER1. Check:• Oil coolerCracks/damage → Replace.2. Check:• Oil cooler inlet hose• Oil cooler outlet hoseCracks/damage/wear → Replace.EAS26430INSTALLING THE OIL COOLER1. Clean:• Mating surfaces of the oil cooler and thecrankcase(with a cloth dampened with lacquer thin-ner)2. Install:• O-ring• Oil cooler “1”• Washer “2”• Oil cooler bolt “3”NOTE:• Before installing the oil cooler, lubricate theoil cooler bolt and O-ring with a thin coat ofengine oil.• Make sure the O-ring is positioned properly.• Align the projection “a” on the oil cooler withthe slot “b” in the crankcase.3. Fill:• Cooling system(with the specified amount of the recom-mended coolant)Refer to "CHANGING THE COOLANT" onpage 3-20.• Crankcase(with the specified amount of the recom-mended engine oil)Refer to "CHANGING THE ENGINE OIL"on page 3-12.4. Check:• Cooling systemLeaks → Repair or replace any faulty part.Oil cooler63 Nm (6.3 m·kg, 46 ft·lb)NewNewManuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keysemail: info@motomatrix.co.uk