13.3.5 SettingsTable 374:TMAGGIO Group settings (basic)Name Values (Range) Unit Step Default DescriptionOperation DisabledEnabled- - Enabled Operation Disable / EnablePulseTime 0.050 - 60.000 s 0.001 0.150 Output pulse timeOnDelay 0.000 - 60.000 s 0.001 0.000 Output on delay timeOffDelay 0.000 - 60.000 s 0.001 0.000 Output off delay timeModeOutput1 SteadyPulsed- - Steady Mode for output 1, steady or pulsedModeOutput2 SteadyPulsed- - Steady Mode for output 2, steady or pulsedModeOutput3 SteadyPulsed- - Steady Mode for output 3, steady or pulsed13.3.6 Operation principleThe trip matrix logic (TMAGGIO) block is provided with 32 input signals and 3 outputsignals. The function block incorporates internal logic OR gates in order to providegrouping of connected input signals to the three output signals from the function block.Internal built-in OR logic is made in accordance with the following three rules:1. when any one of first 16 inputs signals (INPUT1 to INPUT16) has logical value 1 thefirst output signal (OUTPUT1) will get logical value 1.2. when any one of second 16 inputs signals (INPUT17 to INPUT32) has logical value1 the second output signal (OUTPUT2) will get logical value 1.3. when any one of all 32 input signals (INPUT1 to INPUT32) has logical value 1 thethird output signal (OUTPUT3) will get logical value 1.By use of the settings ModeOutput1, ModeOutput2, ModeOutput3, PulseTime, OnDelayand OffDelay the behavior of each output can be customized. The OnDelay is alwaysactive and will delay the input to output transition by the set time. The ModeOutput forrespective output decides whether the output shall be steady with an drop-off delay as setby OffDelay or if it shall give a pulse with duration set by PulseTime. Note that for pulsedoperation and that the inputs are connected in an OR-function, a new pulse will only begiven on the output if all related inputs are reset and then one is activated again. For steadyoperation the OffDelay will start when all related inputs have reset. Detailed logicaldiagram is shown in figure 260Section 13 1MRK 506 335-UUS ALogic540Technical manual
