19-10 FRX8000 3.0 User Guide, Rev 02Graphics-level Status DisplaysAlthough Chapter 20 covers statistics, some graphics-level screens includeboth status and statistics information. That statistics information isincluded in this chapter.This feature takes a Network Representation record (see Chapter 4) and displays ascreen similar to Figure 19-8. In Status Display operations, you can monitor status atnetwork, node, LP, or port level, as well as edit the record and perform some on-lineoperations.This Display is accessible only on a local VGA monitor.Press [H] at the Main Menu. The screen will go blank for a few seconds while thesoftware enters graphics level. When prompted, enter a network/subnetwork ID,1–250. (There must be an existing record in the database with this ID.)Figure 19-8 Network/Subnet Status Display[H] from Main MenuEvents: shows the number of unacknowledged events for all nodes thatreport to the local node/NMP (See “ [F2] – Events” on page 19-13.) If CallWaiting also appears in the upper right, a call has been placed to the localnode/NMP, but has not yet been accepted.A status display screen is automatically updated every five seconds, unless a pull-down menu is displayed, in which case updates are recorded in the software but thedisplay is “frozen” until the menu is exited.Connecting lines between components are shown in white if the link is up, or black ifit is down. Objects are color-coded, as shown in Table 19-1, to show whether they arereachable, and whether there are any outstanding events.F1 View F2 Events F3 Environs F4 Operation s Events:24Call WaitingS ubn et 1: Datan et 1111210133040 2021
