19-12 FRX8000 3.0 User Guide, Rev 02IconsSymbols used to represent components in network/subnetwork displays are shownbelow:Figure 19-9 Status Display IconsThe circle on the current database master INM/NMP will be displayed ashollow, rather than filled in as shown above.Pull-down MenusMost selections across the top of a screen have associated pull-down menus thatappear when the selections are chosen (one exception is Events, discussed onpage 19-13). When a pull-down menu appears, the default selection appears in whitetext on a black background. Other items are in black text on a white background,unless they are not valid at the current level, in which case they appear in light greytext on a white background. The default value can be selected by pressing [Enter], orby pressing the [F“n”] key (the one you pressed to display the menu) a second time.Each pull-down menu has an entry–Cancel. Selecting Cancel exits the current menuand allows you to make another [F“n”] selection; pressing [Esc] will do the same thing.[F1] – ViewZoom In (default, except at port level, where it is not valid) allows you tolook at the next lower level of the network. (Position the cursor ona component and select Zoom In.)Zoom Out (default at port level) returns you to the next higher level of thedisplay. (Not valid at network level.)Goto allows you to view another subnetwork, node, or LP withoutmoving one step at a time through the menus. When prompted,enter the subnet/node/LP number(s). (Not valid at port level.)Edit opens (only if your node is database master) Network Representationoperations (see Chapter 4), allowing you to make changes tocomponents of the network representation. (Not valid at node or portlevel.)FRX 8000N7400 DPPMFRX 8000 withattached NMPFRX 8000 or N7500 ICP/INMN7500 DPPMN7500 withattached NMPSubnetworkN7400 withattached NMP
