Cause and Diagnostic Codes D-3Diagnostic CodesNetwork-Generated CodesThese diagnostic codes are generated by the network in Clear, Reset, and Restart Indi-cation packets, as well as Registration Confirmation and diagnostic packets:Hex. Dec. Description00 00 No additional Information01 01 Invalid P(s)02 02 Invalid P(r)10 16 Packet Type Invalid(Restart Transfer Phase)11 17 Packet type Invalid for State r1 Packet Level Ready12 18 Packet type Invalid for State r2 DTE Restart Request13 19 Packet type Invalid for State r3 DCE Restart Indication(Call Setup Phase)14 20 Packet type Invalid for State p1 Ready15 21 Packet type Invalid for State p2 DTE Waiting16 22 Packet type Invalid for State p3 DCE Waiting17 23 Packet type Invalid for State p4 Data Transfer18 24 Packet type Invalid for State p5 Call Collision(Call Clearing Phase)19 25 Packet type Invalid for State p6 DTE Clear Request1A 26 Packet type Invalid for State p7 DCE Clear Indication(Reset during data xfer)1B 27 Packet type Invalid for State d1 Flow control Ready1C 28 Packet type Invalid for State d2 DTE Reset Request1D 29 Packet type Invalid for State d3 DCE Reset Indication20 32 Packet not allowed21 33 Unidentifiable packet22 34 Call on one-way LCN23 35 Invalid packet type on PVC24 36 Packet on unassigned LCN25 37 Reject not subscribed to26 38 Packet too short27 39 Packet too long28 40 Invalid GFI29 41 Restart with non-zero bits 1-4 in octet 1, or 1-8 in octet 22A 42 Packet type not compatible with facility2B 43 Unauthorized interrupt confirmation2C 44 Unauthorized interrupt2D 45 Unauthorized reject2F 47 No channel available
