Sending Methods 5-115Sending DocumentsNOTEā¢ When you are sending documents, each page is sent as a separate TIFF image attached to theI-fax. The file name prefix of the image attached to the I-fax is assigned as follows:- If you set the document's name:The file name prefix is generated by the document's name and three digits that signify the pagenumber of the image.Example: document name_001.tif- If you do not set the document's name:The file name prefix is generated by the job number (0001 to 4999) and three digits that signifythe page number of the image.Example: 1231_001.tifā¢ If you do not enter a subject, the default subject set in E-mail/I-Fax Settings is used. To accessthe E-mail/I-Fax Settings screen, pressā [System Settings]ā [Communications Settings]ā[E-mail/I-Fax Settings]. (See "E-Mail/I-Fax Settings," on p. 11-5.)ā¢ You cannot select multiple destinations for the reply-to address.ā¢ [Access Number] is displayed on the screen for selecting the reply-to address only if AccessNumber Management in Restrict the Send Function in System Settings (from the AdditionalFunctions screen) is set to 'On'. (See "Access Number Management," on p. 11-19.ā¢ For instructions on storing your machine's e-mail address, see the Network Guide.3 Press .
