Checking/Changing the Status of Send Jobs 8-78 Checking/Changing the Send/Receive Status5 Change the destination.The types of destinations and the settings that you can change are:• If the Color Universal Send Kit (standard-equipped for the iR C4580i/iR C4080i) is activated:• If the optional Super G3 FAX Board is installed:6 Press [OK].Resending a JobYou can resend jobs that are cancelled due to transmission errors.IMPORTANT• To be able to resend jobs that have been cancelled due to a transmission error, you must first set EraseFailed TX in TX Settings under in Communications Settings (from the AdditionalFunctions screen) to 'Off'. (See "Automatic Document Deletion," on p. 9-9.)• You cannot resend fax jobs sent with the Direct Sending or Manual Sending mode, or sent fromcomputers via the fax driver because the statuses of those jobs are not displayed.1 Press [System Monitor] ➞ [Send] ➞ [Status].If necessary, see the screen shots in step 1 and step 2 of "Changing the Destination," onp. 8-5.2 Select the job that you want to resend ➞ press [Details].- E-mail: E-mail Address- I-Fax: I-Fax Address, Mode, Send Via Server (On/Off)- File: Host Name, File Path, User, Password- Fax: Fax Number
