LDAP Server Settings 11-5511 System Manager Settings[Password]:Press [Password] ➞ enter a password ➞ press [OK].Re-enter the password for confirmation ➞ press [OK].After pressing [OK], the password that you entered appears as asterisks (********) on theRegister screen.[Domain Name]:Press [Domain Name] ➞ enter a domain name ➞ press [OK].Enter the directory tree name of the Active Directory, such as.:NOTEIf Use Asterisks to Enter Access No./Passwords in System Settings (from the AdditionalFunctions screen) is set to 'Off', the password that you enter is not displayed as asterisks on thePassword screen. (See Chapter 6, "System Manager Settings," in the Reference Guide.)Changing an LDAP Server SettingYou can change the settings for a stored LDAP (Lightweight Directory Access Protocol) server.1 Press ➞ [System Settings] ➞ [Register LDAP Server].2 Select the LDAP server whose settings you want to change ➞press [Edit].3 Change the necessary settings ➞ press [Next].[On]: When searching for information on the server, a login information dialog box isdisplayed even if a password is not required.[Off]: When searching for information on the server, a login information dialog box is notdisplayed.
