Communications Settings 11-511 System Manager SettingsCommunications SettingsThis section describes the e-mail, I-fax, fax, and Memory RX Inbox settings.E-Mail/I-Fax SettingsYou can change the e-mail and I-fax transmission settings. The following settings are available.NOTEThis mode is available only if the Color Universal Send Kit (standard-equipped for the iR C4580i/iRC4080i) is activated.■ Maximum Data Size for SendingSets the maximum data size for outgoing e-mail messages and I-fax documents. If an e-mail messageexceeds this data size limit, it is split up into several e-mail messages before being sent. However, if anI-fax transmission exceeds the data size limit, it is handled as an error, and it is not sent.IMPORTANTWhen sending an e-mail or I-fax document, you can set to divide the data before sending it if the size ofthe data exceeds the maximum data size for sending.NOTEFor information on dividing data before sending it, see "Specifying Destinations Using the New AddressTab," on p. 2-2, and "Storing New Addresses," on p. 10-5.■ Full Mode TX TimeoutSets the time that elapses before sending operations terminate (automatically) if you do not receive anotification e-mail message (MDN) from the recipient when you send an I-fax in the Full Mode.
