Special Dialing 7-57Special Fax FunctionsSpecial DialingEnter fax numbers as described below when the CLC5151/CLC4040/iR C4580i/iR C4080i isconnected to an extension, or when you want to enter international fax numbers.■ Calling from an ExtensionWhen calling an outside line from an extension, the outside line access number (such as 0) is normallydialed before the fax number of the destination. In the same manner, when the CLC5151/CLC4040/iRC4580i/iR C4080i is connected to an extension, the outside line access number needs to be enteredbefore fax numbers. You can also enter a pause time (i.e., the amount of time the machine waits afterdialing the outside line access number when calling from an extension) together with these numbers.■ International DialingYou can enter a pause time (i.e., the amount of time the machine waits after dialing the international faxnumber) together with an international fax number.NOTEThis mode is available only if the optional Super G3 Fax Board is installed.Calling from an ExtensionThis section describes only the procedure for entering fax numbers.NOTEFor instructions on setting the R-key, see "Fax Settings," on p. 11-9.
