Erasing Addresses10-3810 Storing/Editing Address Book SettingsErasing AddressesYou can erase destinations stored in the address book.1 Press ➞ [Address Book Settings] ➞ [Register Address].2 Select the destination to be erased ➞ press [Erase].You cannot erase multiple destinations at the same time.Press the alphanumeric keys (e.g., [ABC]) to display the individual keys for each letter ornumber. You can select a letter or number to restrict the displayed range of entries. Press [All]to return to the full address list.You can restrict the type of destinations displayed in the results list by pressing the Typedrop-down list.Press the Address Book drop-down list to display a list of subaddress books 1 to 10.Subaddress books categorize the addresses stored in the Address Book.You cannot select a one-touch button stored in a subaddress book.If you select [All] in the Address Book drop-down list, the destinations stored in the one-touchbuttons are displayed. However, you cannot erase these destinations. For instructions onerasing one-touch buttons, see "Erasing One-Touch Buttons," on p. 10-45.If you select a destination that is stored with an access number, press [Access Number] andthen enter the access number using - (numeric keys). If you press [No Access Number],the destinations that are not managed with an access number are displayed.NOTE[Access Number] is displayed on the screen only if Access Number Management in Restrict theSend Function in System Settings (from the Additional Functions screen) is set to 'On'. (See"Access Number Management," on p. 11-19.)3 Press [Yes].
