Job Recall 5-455Sending DocumentsJob RecallYou can recall the last three addresses, scan settings, and send settings which have been set,and then send your documents.IMPORTANT• The machine considers any one of the following operations a send job:- When settings, such as the destination, scan settings, and send settings, are specified, and the controlpanel power switch, , , or is pressed- When the Auto Clear mode activates after send settings are specified• The Standard mode is not stored in Recall memory.• Identical send settings are stored only once in Recall memory.• If Access Number Management in Restrict the Send Function in System Settings (from AdditionalFunctions screen) is set to 'On', the Recall mode cannot be used.• If Restrict New Addresses in Restrict the Send Function in System Settings (from Additional Functionsscreen) is set to 'On', all stored settings in the Recall mode are erased.NOTEThe three most recent settings that were stored in memory are not erased even when the main power isturned OFF.1 Place your originals ➞ press [Recall].NOTEFor instructions on placing your originals, see Chapter 2, "Basic Operation," in the ReferenceGuide.
